Display Module Solutions

Cold-soak removal of ACF adhesive residue without attacking ITO; works at room temperature with no heating equipment.

Removes OCA/LOCA adhesive residue during screen disassembly and rework without damaging the polarizer.

Rework debonding of UV-cured adhesives for optical and circuit-board parts; compliant alternative free of carcinogenic halogenated solvents.

Chemical stripping of polarizers during display-module disassembly/recycling; alkali bath separates polarizer from glass while protecting the glass substrate.

Precision cleaning before IC/display bonding; halogen-free, phosphorus-free, nitrogen-free and flash-point-free, designed to a no-residue standard.

Process cleaning for color-filter lines; safe to ITO, phosphorus-free and APEO-free with a low-foam design.

Substrate cleaning before polyimide coating; respects the PI red line — no hydrolysis or swelling damage to cured alignment layers.

Cleaning for the liquid-crystal stage of panel processes; a three-no standard keeps the LC cell safe.

Color-filter development benchmarked against Nippon Kayaku; fills a near-empty domestic gap for color-filter lines.

Pattern etching of ITO for panels and touch; organic-acid route with excellent selectivity to glass, photoresist and black matrix.

Etches Mo/Al wiring in copper-process TFT-LCD lines for 4K2K panels; blended-acid mainstream route balancing etch rate and line profile.

Safety companion for glass thinning lines — pre-thinning pretreatment and post-thinning cleaning on a fluorine-free route.